Pulsed Power > High Voltage DC - DC Converters > 10A-25A Series, 10kV to 25kV HV Biasing Supplies

10A-25A Series, 10kV to 25kV HV Biasing Supplies

10kV to 25kV High Voltage Biasing Supplies.

The 10A-25A Series of regulated, high voltage DC-DC Converters are an extension of the A Series, directly addressing the needs of the miniature PCB or chassis-mount ≥10kv application. Designed and built utilising state of the art power conversion topology, these units feature surface mount technology and encapsulation techniques providing high reliability and low cost.

Typical applications for the 10A-25A Series include the following: electrophoresis, mass spectroscopy, electron microscopes, plasma and cathode ray tubes (CRT).

• 0 to 10kV, 15kV, 20kV or 25kV output
• 4, 15 or 30 watts of output power
• Maximum Iout capability down to 0 Volts
• Wide input voltage range
• Indefinite output short-circuit protection
• Output current & voltage monitors
• Fixed frequency, low-stored-energy design
• >450,000 Hr. MTBF @65 degrees C

Other products:
-- Choose other products -- M Series 0-1500V, upto 1W Triple Output - Aux Series New E Series 0-15kV, 30W 10PPM Ripple FL Series <15kV Isolation EFL Series <15kV Isolation-Enhanced I/O New FIL Series 0-5V, 15W HV Programmable Rack 0-40kV, <250W HVA Series 0-5kV, <1W, 1kHz, 25PPM XS Series 0-100V, upto 100mW D Series - Microsize, Regulated HV DC-DC Converter Dual Output - Aux Series Bipolar High Power C Series US Series 0-500V, upto 100mW V Series 0-1500V, upto 1W AA Series 0-6kV, <30W A Series 0-6kV, <30W F Series 0-6kV, <30W, 25PPM Ripple C Series 0-6kV, <30W Cap Charging High Power C Series 0-6kV, <250W Cap Charging 30A - 40A Series 0-40kV, <30W High Power 8C - 30C Series 0-30kV, <125W 10A-25A Series, 10kV to 25kV HV Biasing Supplies

SUPPORT DOCUMENTS