E-Series DC & Energy Storage Capacitors

NWL E Series DC filter and energy storage capacitors

FEATURES:

Dry Construction
High Energy Density
Metalised Construction
High Frequency
High Ripple Current
Pulse duty to 50,000A
Many standard designs

Product Summary:
NWL's new E Series DC filter and energy storage capacitors are setting the standard in power electronics by offering superior performance, reduced volumes and dry packaging for many applications.

Using polypropylene film dielectric with segmented metallised electrodes, E Series capacitors have a much higher energy density than previous generation products, thus replacing aluminium electrolytics, and offering a new film capacitor alternative.

E Series DC filter and energy storage capacitors are available in a wide range of standard ratings or they may be customised to fit specific appllications.

Applications:
NWL's E Series capacitors offer a new standard product for DC Filter and Pulse Discharge applications in power electronic systems. The E Series allows designers to assume the DC Capacitor will not be the limiting factor for long life, high ripple current, high frequency or voltage surge. The E Series voltage rating is uniquely defined to fit the specific application for which it is required.

As evidenced in the chart on the following page in DC Filter applications, Vn is the normal operating level of a continuous DC voltage applied with maximum ripple current at the ambient temperature of 50 degrees Celsius.

In Pulse Discharge applications, Vp is the peak repetitive voltage based on 10^7th cycles with 20% max reversal at the ambient 40 degrees Celsius.

General Specifications:

Reference Specification	IEC 1071-1
Capacitance Tolerance	+/-10%
Operating Temperature	-40 degrees C to +85 degrees C
Ripple Current	Per ratings table at 50 degrees C ambient temperature
Peak Current	The rated peak current (Ip) is for 10 7 cycles at the peak voltage (Vp)
High Voltage Reversal Requirements	Contact factory to discuss requirements exceeding 20%
Test Voltages @25 degrees C	Between terminals 1.5Vn dc, 10s Between terminals and case 2.0Vp dc + 1000~V dc.10s
Encapsulation Type	UL 94VO thermosetting resin

Available Sizes:

Rated DC Continuous Voltage (Vn)	Rated DC Pulse Duty Voltage (Vp)	Capacitance (uF)	Height (mm)	Width (mm)	Non-Recurrent Surge Voltage (Vs)	Irms (A) 50 C	Maximum Pulse Duty Current Ip (A)	Ls (nH)	Weight (Kg)	Part Number
600 600 600 600 600 600	750 750 750 750 750 750	250 500 800 4400 6300 8800	73 125.8 149.2 130.0 171.5 238.2	78.7 78.7 78.7 146.0 146.0 146.9	900 900 900 900 900 900	60 80 80 300 350 400	3,000 6,000 5,000 15,000 22,000 30,000	30 45 80 27 30 38	0.7 1.2 1.6 8.5 9.8 12.8	ES3010 ES3020 ES3050 ES3060 ES3050 ES3040
800 800 800 800 800 800 800 800	1000 1000 1000 1000 1000 1000 1000 1000	280 350 500 700 1600 3200 4000 5500	98.4 125.8 149.2 228.6 130.0 238.2 171.5 258.2	78.7 78.7 78.7 78.7 95.3 95.3 146.0 146.0	1200 1200 1200 1200 1200 1200 1200 1200	80 90 85 100 400 400 400 400	4,200 5,000 4,500 10,000 15,000 30,000 21,600 50,000	60 65 80 80 27 35 30 38	0.9 1.2 1.6 2.0 5.5 8.5 9.8 12.8	ES4010 ES4020 ES4030 ES4040 ES4080 ES4070 ES4060 ES4050
1000 1000 1000 1000 1000 1000 1000 1000	1200 1200 1200 1200 1200 1200 1200 1200	200 250 330 480 1550 2200 2900 3700	98.4 125.8 149.2 228.6 171.5 238.2 238.2 258.2	78.7 78.7 78.7 78.7 95.3 95.3 120.7 146.0	1500 1500 1500 1500 1500 1500 1500 1500	70 70 70 100 400 400 400 400	3,600 3.500 3,500 10,000 17,500 24,800 24,700 25,000	60 65 80 80 28 35 38 38	0.9 1.2 1.6 2.0 6.8 8.5 11.3 12.8	ES5010 ES5020 ES5030 ES5040 ES5080 ES5070 ES5060 ES5050
1200 1200 1200 1200	1400 1400 1400 1400	1100 1550 1900 2700	171.5 238.2 171.5 258.2	95.3 95.3 146.0 146.0	1800 1800 1800 1800	350 400 400 400	15,000 21,400 15,000 21,200	28 37 30 38	6.8 8.5 9.8 12.8	ES6070 ES6060 ES6050 ES6040
1250 1250 1250	1500 1500 1500	140 240 320	3.88 5.88 9.00	3.10 3.10 3.10	1875 1875 1875	60 60 100	3,100 3,000 7,500	60 80 80	0.9 1.6 2.0	ES6010 ES6020 ES6030
1600 1600	2000 2000	85 175	4.88 9.00	3.10 3.10	2400 2400	50 90	2,600 5,200	90 90	1.2 2.0	ES7010 ES7020
2000 2000 2000	2500 2500 2500	25 60 120	2.88 4.88 9.00	3.10 3.10 3.10	3000 3000 3000	50 40 80	2,600 2,100 4,200	35 90 90	0.7 1.2 2.0	ES8010 ES8020 ES8030
2500 2500	3000 3000	40 80	4.88 9.00	3.10 3.10	3750 3750	55 70	1,800 3,600	90 90	1.2 2.0	ES9010 ES9020
3000 3000 3000	3500 3500 3500	10 25 50	2.88 4.88 9.00	3.10 3.10 3.10	4500 4500 4500	50 70 100	2,500 3,600 7,000	35 65 90	0.7 1.2 2.0	ES9030 3S9040 ES9050
4000 4000 4000	4500 4500 4500	8 12 25	3.99 4.88 9.00	3.10 3.10 3.10	6000 6000 6000	30 45 80	1,600 2,400 4,800	75 70 60	0.9 1.2 1.6	ES9060 ES9070 ES9080

Part Number Key / Mounting Options:

EA Welded Aluminum Can - No Brackets
EC Welded Aluminum Can - With Brackets
ET Aluminum Tube, Plastic Ends - No Mounting Studs
ES Aluminum Tube, Plastic Ends - M12 Mounting Studs

Other products: