The GenesysTM Half-Rack size of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Available in 750W with available output voltages from 6 to 600V, and current up to 100A. Active PFC, and universal input head a long list of standard features.
Features:
Highest Power Density available: 750W in a 1U half-rack size
Universal Input 85-265Vac continuous
Active Power Factor Correction (0.99 typical)
Built in RS232/RS485 Interface
Output Voltage up to 600V, Current up to 100A
Front Panel Lockout
Last Setting Memory
High Resolution 16 bits ADCs & DACs
Reliable Encoders for Voltage and Current Adjustment
Parallel Operation with Active Current Sharing
Independent Remote ON/OFF and Remote Enable/Disable
External Analogue Programming and Monitoring
Reliable Modular and SMT Design
19" Rack Mounted ATE benchtop and OEM applications
Five Year Warranty
Optional Isolated Analogue Programming and Monitoring
Optional IEEE 488.2 SCPI (GPIB) Interface
Side-by-side mounting of two units in a 19" rack
LabView & LabWindows Drivers
Constant Voltage/Constant Current auto-crossover
Worldwide Safety Agency Approvals
CE Mark for LVD and EMC Regulation
NEW! GENESYS Half-Rack Size 1U Programmable Power Supplies
Model Number
Rated Power (Watts)
Output Voltage (Volts)
Output Current (Amps)
Ripple mV RMS (5Hz-1MHz)
Noise p-p (<20MHz)
GENH 6-100
600
0-6
0-100
8
60
GENH 8-90
720
0-8
0-90
8
60
GENH 12.5-60
750
0-12.5
0.60
8
60
GENH 20-38
760
0-20
0-38
8
60
GENH 30-25
750
0-30
0-25
8
60
GENH 40-19
760
0-40
0-19
8
60
GENH 60-12.5
750
0-60
0-12.5
8
60
GENH 80-9.5
760
0-80
0-9.5
8
80
GENH 100-7.5
750
0-100
0-7.5
8
80
GENH 150-5
750
0-150
0-5
12
100
GENH 300-2.5
750
0-300
0-2.5
20
120
GENH 600-1.3
780
0-600
0-1.3
60
300
Specification: AC Input All models: 85-265 VAC continuous single phase, 47-63 Hz AC Line Current (100/200VAC): 750W - 10.5A/5A Active PFC (0.99)
Protective Features Adjustable OVP, UVL Adjustable Current Foldback Over-temperature Safe/Auto Start
Programming 0-5V, 0-10V User Selectable via DIP Switch RS232/RS485 Standard Parallel Master/Slave setting reports total current of up to four like supplies connected in parallel
Mechanical Size: All models 214mm W x 43.6mm H (57mm Benchtop version), x 437.5mm D Weight: 9.9lbs/4.5kg
Options: (Factory installed) Embedded IEEE 488.2/SCPI Compliant Program Voltage & Current Measure Voltage & Current Overvoltage setting & shutdown Current Foldback Setting & Shutdown Labview Drivers available
Interface Options: Isolated Analog Program/Monitor Rear panel operation for harsh electrical environments and series master/slave IS510 - 0-5V & 0-10V User Selectable IS420 - 4-20mA LXI, GPIB (IEEE)
