Specification:
AC Input
400 VAC or 480 VAC, 3 phase, 50/60 Hz.(Please specify at the time of order).
Average Charging Rate
30,000 J/s at rated Output Voltage.
(25,000 J/s with 400VAC line)
Peak Charging Rate
37,500 J/s at rated Output Voltage.
(32,500 J/s with 400VAC line)
DC Power Rating
50,000 W at rated Output Voltage.
(30,000W with 400VAC line)
Standard Voltage Ranges
1 kV, 1.5 kV, 2 kV, 3 kV, 4 kV, 5 kV, 6 kV, 10 kV, 15 kV, 20kV, 30 kV, 40 kV, 50 kV.
All models continuously vary from 0 to 100% of rated voltage output.
Linear to within 1% of full scale. Accuracy 1% of rated.
Polarity
Available as fixed Positive or Negative, Please Specify.
High Voltage Assembly
Sealed FC72 insulated and cooled
Output Connector/Cable
|
Output Voltage |
Connector |
Cable |
|
1-25kV |
Proprietary |
DS 2124 |
|
25-50kV |
Proprietary |
DS 2147 |
Input Connector
VDE, UL, CSA, approved.
Power Factor
Passive PFC 0.85 min
Efficiency
Better than 85%
| Stored Energy
Less than 0.3 Joules all models.
Stability
0.2% per hour after 1 hour warm-up.
Cooling
Flowed water at 2US GPM (7.6L/min) exit temperature between 15 degrees C and 35 degrees C. All water paths are at ground potential and are copper brass or hydraulic hose
Pulse to Pulse Repeatability
+/- 0.5% to 100Hz standard.
For higher repetition rates, consult factory
Temperature Coefficient
100 PPM per degrees C
Ambient Temperature
Storage: -40 to +80 degrees C
Operating:5 to +45 degrees C
Humidity
10-90% Non-condensing
Protection
The power supply is protected against open circuits, short circuits, overloads and arcs.
Mechanical
19" rack (483mm) x 22"(560mm) x 12.25"(311mm)
Accessories
- Detachable 10 foot HV cable
- Operating manual
Remote Control
Via 25pin d-type connector on rear panel.
Click here for Remote Control details.
Options
| Suffix -5V |
0 to +5 volt program (0 to full-scale output) |
| Suffix -LP |
Latching overload protection |
| Suffix -RS |
Remote sense | |
