NEW! "HVA" Series - Unipolar or Bipolar High Voltage Amplifier Can both source and sink current Bipolar models available at 0 to 5kV, Unipolar modules available at 0 to 10kV
Can both source and sink current
PPM level line & load regulation
Bipolar models available at 0 to 5kV
Unipolar models available at 0 to 10kV
25ppm temperature coefficient
Operates in DC, reversible, and amplifier modes
The new "HVA" Series of DC-to-DC high-voltage power supplies operates a precision filter/divider & linear HV switch to produce a High Voltage Amplifier (HVA). These new modules provide a high-resolution, programmable, high-voltage DC to greater than 1 kHz output. The "HVA" Series is optimised for bias applications while providing excellent line regulation, load regulation, dynamic response, and stability. The "HVA" Series can both source and sink current!
The following waveforms are for a 5HVA24-BP1 with no load applied: Picture 1 is a 10kV step, top is Voltage Programming, bottom is HV 5kV division
Picture 2 is a 10kV peak to peak sine wave, top is programming, bottom is HV
